A newly installed network router in Arkansas helped trigger a nationwide U.S. flight grounding, according to The Wall Street Journal. The report says the device overwhelmed the Federal Aviation Administration's aging communications infrastructure.

The disruption began with communications problems at the FAA's Indianapolis air traffic control center and then spread across much of the country's aviation network. Investigators traced unusually heavy data traffic to an FAA radio facility in El Dorado, Arkansas, and a radar installation in Amarillo, Texas.

FAA technology chief Rebecca Guy said the two locations were generating about 1,000 network connections every four to five seconds. The overload disrupted communications at 17 of the FAA's 22 centers that manage high-altitude flights, prompting authorities to halt departures nationwide.

The Arkansas router was manufactured by Juniper Networks, a subsidiary of Hewlett Packard Enterprise (NYSE). Defense contractor L3Harris Technologies (NYSE) had recently installed it. L3Harris manages the FAA Telecommunications Infrastructure network, which connects radar, communications and flight-data systems.

Investigators are examining whether the incident resulted from faulty equipment, improper installation or incorrect configuration. HPE said its Juniper devices operated as intended and had not failed.

Officials identified a router broadcasting feature that appeared to generate excessive network traffic. They disabled it across the FAA's roughly 60 Juniper routers. Communications stabilized after the Arkansas and Texas devices were disconnected from the broader network.

Transportation Secretary Sean Duffy said investigators found no evidence of malicious activity.

The report says the incident exposed vulnerabilities in the FAA's decades-old telecommunications system, which relies partly on copper wiring and has experienced repeated failures. A 2023 external review warned that growing outages and insufficient modernization funding could create unacceptable operational risks. FAA Administrator Bryan Bedford said maintaining the aging infrastructure costs hundreds of millions of dollars each year. Duffy warned that further disruptions remain possible before the planned replacement of the copper wiring is completed in late 2028.